USB cable for connecting an 8/9/10 pin 2mm pitch usb device to a 2mm pitch USB pin header.
2x5 way 2mm pitch connectors at both ends of the cable.
Length 36cm (longer/shorter cables available on request).
Please note these cables are
for use with standard motherboards/devices which use a 2.54mm
pitch header. For standard motherboards/devices please see the
cables in the "internal USB cables" and "Internal USB adaptor
These cables are supplied with the 2x5 way motherboard connector
configured for USB pin headers with the configuration shown
below. The pins marked * can be ignored (one or both may not be present on your motherboard or if present they may be labelled gnd or s-gnd ).
Your motherboard and/or equipment will be damaged if the cable is
used with a USB header which does not use this configuration.
The cables can be supplied with alternative configurations but you
will need to contact us at the time of purchase to arrange this.
2x5 way motherboard connector configuration.