USB cable for connecting :-
two standard 4/5 pin usb devices
to a 2x5 way 2mm pitch USB pin header
One usb unit with an 8/9/10 pin connector to a 2x5 way 2mm pitch USB pin header
Please note these cables are
for use with standard motherboards which use a 2.54mm
pitch header. For standard motherboards please see the
cables in the "internal USB cables" and "Internal USB adaptor
The cables are 55cm long and feature :-
Two 5 way 2.54mm pitch device connectors (standard usb header pitch).
One 2x5 way 2mm pitch motherboard usb pin header connector.
When connecting devices with 4/5 pin connector the devices can be situated in
different parts of the pc case, for example different drive bays.
When connecting usb units with 8/9/10 pin connectors the two 5 way
device connectors can be placed alongside each other to form a 2x5 way
These cables are supplied with the 2x5 way motherboard connector
configured for USB pin headers with the configuration shown
below. The pins marked * can be ignored (one or both may not be present on your motherboard or if present they may be labelled gnd or s-gnd ).
Your motherboard and/or equipment will be damaged if the cable is
used with a USB header which does not use this configuration.
The cables can be supplied with alternative configurations but you
will need to contact us at the time of purchase to arrange this.
2x5 way motherboard connector configuration.